EMU – engine management system

  • 6 injection channels – 5A, sequential, saturated, individual trims, double maps
  • Staged injection
  • VE (Volumetric Efficiency) fuelling model with Charge Temp compensation
  • Delta FuelPress compensation. Function can be used also for engine safety when pressure regulator or pump failure. Pressure sensor need to be installed and calibrated
  • 6 ignition channels – 7A, on-board ignitors, individual trims, double maps. Free channels can be used as AUX outputs
  • 6 AUX outputs – 5A, general functions - fans, pumps, shiftlight, warning light, wat/met injection, NO2, AC etc
  • 2 EGT amps for K-type sensors, EGT alarm, EGT trims, up to 8 EGTs can be connected with EGT-CAN module
  • 4 idle stepper outputs – 1A, stepper & PWM PID idle control
  • 2 knock sensor inputs - 1-20kHz, fuel/ign/boost trims, warning light
  • DBW (electronic) throttle control – with external module
  • CAN-BUS – with special CAN-EMU model or external CAN module. Support for many CAN dashboards (OEM and race dashes), CAN controlled power steering systems etc. With external CAN module Analog inputs can be expanded with additional 4 channels.
  • Bluetooth – external module for data transfer to Android devices. Android application available. Special CAN/BT module to have both CAN and BT options.
  • LSU4.2 WBO2 internal controller, open-/closed-loop fuel correction
  • Internal 400kPa MAP sensor
  • Internal BARO sensor
  • 4 digital inputs (HALL/VR)
  • 3 dedicated inputs (IAT, ECT, TPS)
  • 4 extra analog inputs (0-5V), can be expanded by additional 4 with CAN module
  • 2 variable camshaft control channels (BMW Vanos, Toyota VVTi, Subaru AVCS, Honda VTEC etc)
  • Boost control - open-/closed-loop, different trims (IAT, EGT, speed, gear), double maps (switchable with toggle switch or blending with potentiometer or automatic blend with FlexFuel setup on ethanol fuels)
  • Double maps (VE, Target Lambda/AFR, Ignition, variable cam, boost, start fuel)
  • Nitrous control – activation parameters (rpm, TPS, load, ECT, gear, speed), trims (fuel, ignition)
  • Traction control - delta RPM, up to 10 setups with rotary switch
  • Motorsport functions - ALS, launch, flatshift, pitlane limiter, gear based shiftlight etc
  • Rolling antilag - adjustable launch control from roll
  • FlexFuel control - ethanol content % measurement with special FF sensor. Automatic engine control trims from FF% value.
  • Engine protection - temps (ECT, IAT, EGT, oil), pressures (oil, fuel), knock
  • Wide range of supported triggers
  • AC control - compressor and cooling fan switching
  • Tacho and Speedo adjustable outputs
  • In-built SCOPE for unknown triggers testing
  • diagnostics - on-board, CEL output
  • PC logging - up to 100 parameters, 20Hz
  • Password protection
  • Customizable short keys
  • Virtual dyno
  • Free software & firmware updates
  • USB communication
  • English user manual & on-board content help
  • Warranty 24 month

Additional modules & accessories:

  • CAN BUS modul – CAN communication, 4 extra analog inputs
  • EGT-CAN modul - up to 8 EGT sensor connection, requires also CAN
  • Bluetooth modul – modul for data transfer to Android devices via BT
  • BT/CAN - Bluetooth modul for using both BT and CAN
  • DBW throttle modul
  • PnP model specific interconnectors - additional info
  • universal pre-terminated loom
  • shielded cabel (Raychem)
  • sensors & accessories (EGT, FlexFuel, WBO2, pressure sensors, temp sensors), solenoids, connectors
  • AL ecu bracket